Controls Joystick (Single)

Control Panel Joystick Single

• Set of controls without the standard aluminium anodized front panel
• Separate On/Off button with Quick Connect/Release Connector
• Use this set when installing Joystick and On/off button directly to a dashboard
• When no Jet Thruster control panel shield is required

All our control panels have the on/off button integrated in the aluminium panel. In case you need to install the controls to a dashboard, helm station or any other place where based upon customer request, or technical situation, no panel is preferred, you can order this dedicated control set.

The set provides an On/Off button which will be connected with a plug&play connector to the controls assembly.

Normally it's impossible to place the soldered-on on/off switch to the dasboard without cutting the original cables. With this set we now offer a situation where the mandatory on/off button is connected to the controls with a quick release connector setup. Simply drill the hole for the on-off button and lock it in place with the provided nut. Connect this switch with the water proof connector and the system will be operational.

Note: Without this On/Off switch the system will not work. Make sure to place the on/off switch near joystick, and verify cable lenght prior to drilling.